Products description
Properties
- Driver chip for all kinds of EL-panels
- +2.2V to +4.5V Battery Operation
- 8-pin nsoic housing
- Pin 1 for digital ON/OFF-control
- Output voltage typical 160 Volt AC for the EL-panels
- 500mW max. power dissipation
Application
- Very useful for your own designs and EL-applications.
- Watch the demo-circuit in our picture below.
- Notice please: we offer just the chip SP4405, not the demo circuit!
Notice
- We offer a small pcb for this chip, which helps you to build up your own circuit.
- For the optimal coil we suggest to test several types, because the output largely depends on the coils characteristics. We had excellent results with the 262LY-series (471K and above) from TOKO, alternative Newport coils (22R225) 2.2mH, 6.25 Ohm have been very good, too.
- The complete and detailled datasheet for the SP4405 can be found below this article for download.
File
Customers who bought this product also bought the following products:
Development pcb for SIPEX SP4405 nsoic 8-pin EL-driver chip. Dimensions: 20mm x 8mm x 1mm
EL-panel, blue-green, sliceable, laminated, outer dimensions(LxWxH): 30mm x 94mm x 0.42mm for LCDs of E-MU EIII, EMU Emulator III, Graphic Equalizer TC 1128 (cut)
EL-inverter without housing for 2.2 up to max. 5 Volt DC power supply. For our EL-panels up to 60 cm2. Dimensions without cables (LxWxH): 15mm x 14mm x 9.5mm
Housed EL-inverter for 5 Volt DC power supply. For EL-panels up to 105cm2. Dimensions (LxWxH): 17.5mm x 17mm x 19.3mm (without solder pins)
EL-panel, softyellow(= better contrast), incl. attached cables and connector, laminated, sliceable, outer dimensions(LxWxH): 46mm x 67mm x 0.42mm, backlight for Casio FZ-1, Hohner HS-1, HS-1E
This Product was added to our catalogue on 14/04/2012.
