Products description
Properties
- high quality notebook inverter without housing for 9 Volt DC power supply
- dimmable
- brightness adjustment at 0 - 2.5 Volt DC voltage level
- DC supply by 10-pin flat cable
- JST SM02B output connector
- electronic short circuit protection
- just 7mm height
- 2 mounting holes
Main applications
- supply of CCFLs with a working voltage of max. 745 Volt at about 5 mA, max. 300mm x 2mm
- high quality displays and light sources
- general inverter replacement
- battery driven applications
- battery driven 9 Volt test inverter
- driver circuit for high voltage cascades
Technical data
| Mechanichal | Tolerance | |
| Length L | 110 mm | +/- 0.5 mm |
| Width W | 13.5 mm | +/- 0.5 mm |
| Heigth H | 7 mm | +/- 0.5 mm |
| Weight without cables | 9 g | +/- 1 g |
| Length supply cable | no cable | - |
| Length output cable | no cable | - |
| Working temperature | - 0 bis + 65°C | - |
| Storage temperature | - 40 bis + 85°C | - |
| Housing | no | - |
| Electrical | ||
| Supply voltage | 9 Volt DC | +/- 1 Volt DC |
| Supply current | 700 mA | +/- 30 mA |
| Working voltage | 745 VRMS | +/- 50 VRMS |
| Working current | 5 mARMS | +/- 1 mARMS |
| Power output | 3725 mVA | +/- 10 % |
| Sinuslike AC | 53 KHz | +/- 5 KHz |
| Short circuit protection | yes | - |
| Open lamp and arc protection | no | - |
Additional notes
The installation and exchange of inverters requires certain technical skills. Our safety and handling instructions for inverters and CCFLs keep you up-to-date. We kindly ask you to read this instructions carefully, which can be found in the area: Information. Usually our electronic inverters are offered excluding cables(watch description of the article). If needed, please ask for input cables. Silicone output cables, caps and other hard to find parts are located in the area: CCFL -> Accessories.
A description of the pins and how to dim will be delivered together with the inverter, only.
Customers who bought this product also bought the following products:
White silicone cap in rectangular shape for CCFLs between 2mm and 2.3mm diameter
This Product was added to our catalogue on 30/09/2007.
