Products description
Properties
- electrodes prepared as: tinned wire ends
Main applications
- backlight lamp for 8.4" TFT screens in digital equipment
- PDAs, measuring instruments
- ultra small and flat lighting applications
- white design illumination with a bluish hue
Technical data
| Mechanical | Tolerance | |
| Diameter | 2.2 mm | +/- 0.1 mm |
| Length L | 180 mm | +/- 1 mm |
| Luminous length LL | > 160 mm | +/- 1 mm |
| Length of electrodes | > 10 mm | + 15 mm |
| Warm-up time | 3 min | - |
| Working temperature | 0 bis + 50°C | - |
| Storing temperature | - 50 bis + 110°C | - |
| Electrical | ||
| Working voltage | 460 VRMS | +/- 50 VRMS |
| Working current | 5 mARMS | + 1 mARMS |
| Power consumption | 2300 mVA | +/- 10 % |
| Sinusoidal AC | 20 - 100 KHz | - |
| Optical | ||
| Colour temperature | 4395°K | +/- 200°K |
| Visible colour | weiss | - |
| Luminance | 40000 cd/m2 | +/- 5% |
| Lifetime | 40000 h | - |
Additional notes
CCFLs are made of glass, which is easily broken. The exchange of CCFL tubes and inverters requires certain technical skills. Our safety and handling instructions for inverters and CCFLs keep you up-to-date. We kindly ask you to read this instructions carefully, which can be found in the area: Information. Silicone cables and and silicone caps of the originally built-in CCFL can be re-used if in a good condition. If not re-usable we offer silicone replacement cables and caps and other hard to find parts in the area: CCFL -> Accessories.
As a replacement for
LCD-panel: Hitachi SX21V001_ZA
(Notes: Listing is uncomplete and without warranty.)
Customers who bought this product also bought the following products:
Original set of miniature fluorescent lamps, 2 pieces 255mm x 12mm (L x Ø), type special, white, ready for connection with caps, cables and connectors for SHARP LQ10DH11, Siemens operator panel OP30, 10.4" Sipcom Light
This Product was added to our catalogue on 20/05/2007.
