Products description
Properties
- electrodes prepared as: steel wire ends to crimp or screw, NOT solderable!
- black rubber socket around glass ends for protection
- very low production of ozone by covered clear glass
Main applications
- measuring instruments
- detection of hidden symbols on materials
- disinfection, fumigation, removing of algae
- fluorescence analysis, e.g. of gemstones and minerals
Technical data
| Mechanical | Tolerance | |
| Diameter | 3.6 mm | +/- 0.1 mm |
| Length L | 120 mm | +/- 1 mm |
| Luminous length LL | > 80 mm | +/- 1 mm |
| Length of electrodes | > 10 mm | + 15 mm |
| Warm-up time | 3 min | - |
| Working temperature | 0 bis + 50°C | - |
| Storing temperature | - 50 bis + 110°C | - |
| Electrical | ||
| Working voltage | 145 VRMS | +/- 50 VRMS |
| Working current | 4 mARMS | + 1 mARMS |
| Power consumption | 580 mVA | +/- 10 % |
| Sinusoidal AC | 20 - 100 KHz | - |
| Optical | ||
| Colour temperature | 254nm | - |
| Visible colour | UV-C | - |
| Luminance | - | - |
| Lifetime | 10000 h | - |
CCFLs are made of glass, which is easily broken. The exchange of CCFL tubes and inverters requires certain technical skills. Our safety and handling instructions for inverters and CCFLs keep you up-to-date. We kindly ask you to read this instructions carefully, which can be found in the area: Information. Silicone cables and and silicone caps of the originally built-in CCFL can be re-used if in a good condition. If not re-usable we offer silicone replacement cables and caps and other hard to find parts in the area: CCFL -> Accessories.
Additional notes
Customers who bought this product also bought the following products:
Encapsuled and shielded 12 Volt inverter for CCFLs with 200-240mm length x 2mm diameter, single ouput, not dimmable standard inverter. Dimensions(LxWxH): 85mm x 24mm x 18mm
This Product was added to our catalogue on 07/02/2007.
