Products description
Properties
- high quality EL-panel with light off colour: grey and light on colour: azure blue
- all around lamination by factory for proper protection
- 2 solderable contacts
- overall dimensions(LxWxH): 21mm x 166mm x 0.33mm
- luminous dimensions(LxW): 17mm x 158mm
- lifetime >3000 hrs = 50% of initial brightness, useful lifetime >10.000 hrs
- luminance ~ 10 cd/m2 (depends on voltage and frequency of inverter)
- EL-panel can be cut by scissors if you need a smaller luminating area
- watch the attached backlight exchange manual from below how to replace the EL-panel yourself
- shipping in a stiff and stable box to prevent a buckling of the EL-panel for a safe transport worldwide
Main applications
- backlight EL-lamp for display of Akai Sampler S950
- backlight EL-lamp for display of Drawmer M500
- backlight EL-lamp for display of Dynacord ADD one
- backlight EL-lamp for display of HITEC AC-1 (must be cut down to 162mm length)
- backlight EL-lamp for display of Korg 03 R/W
- backlight EL-lamp for display of Korg DS-8
- backlight EL-lamp for display of Korg M1, Korg M1 Rex
- backlight EL-lamp for display of Korg M3R
- backlight EL-lamp for display of Korg Re1
- backlight EL-lamp for display of Lexicon MRC (must be cut down to 106mm x 20mm)
- backlight EL-lamp for display of Positec Vorschubsteuerung PSS 150
- backlight EL-lamp for display of PPG 2.3 Synthesizer (small nose at the end should be cut away)
- backlight EL-lamp for display of Roland D-50
- backlight EL-lamp for display of Roland D-550
- backlight EL-lamp for display Sharp LM640HCN24V
- other replacement applications and machines
- ultra small and flat lighting applications
- azure blue night light
- design and art objects
- light spots
- emergency lights
(Notes: Application listing is uncomplete and without warranty.)
File
Customers who bought this product also bought the following products:
EL-panel, softyellow (= better contrast), sliceable, laminated, outer dimensions(LxWxH): 43mm x 155mm x 0.33mm for LCD Optrex DMF5005, AND711A, Toshiba TLX 711A, Korg i3, Korg Wavestation A/D, Korg Wavestation EX, Korg Wavestation WS1, Korg Wavestation WSA/D, Roland A-50, Roland A80, Roland D-70, Roland GC-8, Yamaha DEQ 5, Yamaha, QS300, Yamaha SY-77, Yamaha SY-99, Yamaha TG-77, Yamaha W5, Yamaha W7
EL-panel, pink-white, sliceable, laminated, outer dimensions(LxWxH): 24mm x 96mm x 0.42mm for LCDs of Brother KH970 control panel CB 1, Roland MC500 MKII, Sony HR MP5
EL-panel, azure blue, sliceable, laminated, outer dimensions(LxWxH): 18mm x 74mm x 0.42mm for LCDs in ART Multiverb III, ELKA EK33, EK44, EM33, EM44, ER33, ER44, E-MU EMAX I and II, Emulator II, SP12, SP1200, Korg DRV-2000, Kurzweil K1200, Roland Alpha Juno 1 and 2, Roland MKS-80, Roland PG1000, Sequential Circuits Prophet VS, Yamaha REV-7 and suitable for LCD Optrex DMC16207-AE DMC 16249, SHARP LCD LM16155
Housed EL-inverter for 5 Volt DC power supply. For EL-panels up to 105cm2. Dimensions (LxWxH): 17.5mm x 17mm x 19.3mm (without solder pins)
EL-inverter without housing for 2.2 up to max. 5 Volt DC power supply. For our EL-panels up to 60 cm2. Dimensions without cables (LxWxH): 15mm x 14mm x 9.5mm
This Product was added to our catalogue on 30/12/2023.
