Properties
Main applications
Remark: The org. backlight of the Roland E-96 and some other devices have their pins at a slight different position. Therefore you need to add small cables to our EL-panel to fit to the solder points.
(Notes: Application listing is uncomplete and without warranty.)
Housed EL-inverter for 5 Volt DC power supply. For EL-panels up to 105cm2. Dimensions (LxWxH): 17.5mm x 17mm x 19.3mm (without solder pins)
EL-panel, softyellow (= better contrast), sliceable, laminated, outer dimensions(LxWxH): 47mm x 157mm x 0.33mm for LCD Optrex DMF5005, LCD Sharp LM24014, Akai MPC60 version 1, ASQ-10, EMU Emulator IV, Korg 01 W, 01 R, 01WFD, T1, T2, T3, Kurzweil K2000(r), Roland DM80R, DM800, S750, S770, W-30
EL-panel, blue-green, sliceable, laminated, outer dimensions(LxWxH): 21mm x 166mm x 0.33mm for Akai Sampler S950, Drawmer M500, Dynacord ADD-one, HITEC AC-1 (cut), Korg 03 R/W, DS8, M1, M1 Rex, Re1, M3R, Lexicon MRC (cut), Positec PSS 150, PPG 2.3 (cut), Roland D-50, D-550 and Sharp LM640HCN24V
EL-panel, pink-white, sliceable, laminated, outer dimensions(LxWxH): 18mm x 74mm x 0.42mm for LCDs in ELKA EK33, EK44, EM33, EM44, ER33, ER44, E-MU EMAX I and II, Emulator II, SP12, SP1200, Korg DRV-2000, Kurzweil K1200, Roland Alpha Juno 1 and 2, Roland MKS-80 and MKS-100, Roland PG1000, Roland S-10, Sequential Circuits Prophet VS, Yamaha REV-7 and suitable for LCD Optrex DMC16207-AE, SHARP LCD LM16155
EL-panel, pink-white, laminated, sliceable, outer dimensions(LxWxH): 40mm x 132mm x 0.33mm for Akai PB1000, HD1000, S1000, S1100, S1200, S2800, S2800i, S3000, S3000XL, S3000i, CD3000, CD3000XL, CD3000i, S3200, S3200XL, VX600, MPC3000, MPC60II
This Product was added to our catalogue on 27/04/2008.