Products description
Properties
- high quality EL-panel with light off colour: softyellow and light on colour: softyellow
- light colour -softyellow- gives off a better contrast to the blue-violett LCD pixels than blue!
- all around lamination by factory for proper protection
- 2 solderable contacts
- overall dimensions(LxWxH): 15mm x 160mm x 0.33mm
- luminous dimensions(LxW): 11mm x 155mm
- lifetime >3000 hrs = 50% of initial brightness, useful lifetime >10.000 hrs
- luminance ~ 10 cd/m2 (depends on voltage and frequency of inverter)
- EL-panel can be cut by scissors if you need a smaller luminating area
- watch the attached backlight exchange manual from below how to replace the EL-panel yourself
- shipping in a stiff and stable box to prevent a buckling of the EL-panel for a safe transport worldwide
Main applications
- backlight EL-lamp for display of Korg A2 Sequenzer
- backlight EL-lamp for display of Korg A3 Sequenzer
- other replacement applications and machines
- ultra small and flat lighting applications
- yellow night light
- design and art objects
- light spots
- emergency lights
(Notes: Application listing is uncomplete and without warranty.)
Customers who bought this product also bought the following products:
EL-panel, blue-green, sliceable, laminated, outer dimensions(LxWxH): 21mm x 166mm x 0.33mm for Akai Sampler S950, Drawmer M500, Dynacord ADD-one, HITEC AC-1 (cut), Korg 03 R/W, DS8, M1, M1 Rex, Re1, M3R, Lexicon MRC (cut), Positec PSS 150, PPG 2.3 (cut), Roland D-50, D-550 and Sharp LM640HCN24V
EL-panel, softyellow (= better contrast), laminated, sliceable, outer dimensions(LxWxH): 41mm x 66mm x 0.42mm, backlight for Casio FZ-10, FZ-10M, FZ-20M, VZ-1, VZ-10M, Hohner HS-10, HS-10M, HS-20M, HS2/E
EL-inverter without housing for 2.2 up to max. 5 Volt DC power supply. For our EL-panels up to 60 cm2. Dimensions without cables (LxWxH): 15mm x 14mm x 9.5mm
EL-panel, blue-green, sliceable, laminated, outer dimensions(LxWxH): 18mm x 74mm x 0.42mm for LCDs in ART Multiverb III, ELKA EK33, EK44, EM33, EM44, ER33, ER44, E-MU EMAX I and II, Emulator II, SP12, SP1200, Korg DRV-2000, Kurzweil K1200, Roland Alpha Juno 1 and 2, Roland MKS-80, Roland PG1000, Sequential Circuits Prophet VS, Yamaha REV-7 and suitable for LCD Optrex DMC16207-AE, DMC16249, SHARP LCD LM16155
EL-panel, blue-green, incl. attached cables and connector, laminated, sliceable, outer dimensions(LxWxH): 46mm x 67mm x 0.42mm, backlight for Casio FZ-1, Hohner HS-1, HS-1E
This Product was added to our catalogue on 12/09/2011.
